The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   OR WTB 73-87 2wd steering box (https://67-72chevytrucks.com/vboard/showthread.php?t=779097)

ddc456 01-07-2019 02:32 PM

WTB 73-87 2wd steering box
 
I am getting ready to start my cross over steering for my 78 one ton and i believe i need to change out my steering box to a 2wd application. Let me know what you have available and price. Shipping will be to 97702.

Thanks
Doug

xrcr 01-07-2019 05:02 PM

Re: WTB 73-87 2wd steering box
 
Not sure if you have to or not. Rebuilts are pretty easy to find and decently priced

BLK65K10 01-07-2019 11:22 PM

Re: WTB 73-87 2wd steering box
 
I have a couple of boxes. $40 plus shipping. I think one will fit in a large flat rate box so that would be $19 but I will have to double check that. Let me know if you want one. Thanks Lyle

ddc456 01-08-2019 06:42 PM

Re: WTB 73-87 2wd steering box
 
Quote:

Originally Posted by BLK65K10 (Post 8438961)
I have a couple of boxes. $40 plus shipping. I think one will fit in a large flat rate box so that would be $19 but I will have to double check that. Let me know if you want one. Thanks Lyle

Lyle

thank you. I think im just going to buy a refurbished unit. If something changes i'll get in touch w/ you. thanks again

sweetk30 01-08-2019 09:08 PM

Re: WTB 73-87 2wd steering box
 
been reading a lot of guys not liking the refurb quality from box store rebuilds .

lot of guys liking the full kit part #'s from places that do hydro assist or just reg boxes .

and if you ever think you might want hydro assist get the box ported for it now and just cap the ports until your ready .

i have read a lot of good on psc and close to as much on agr .

i have a 4wd agr box i got in trade for work i did with around 500 miles on it the changed to a 2wd for crossover . i can say this box is so nice compared to all my other boxes i have used .

i also did the xj jeep steering shaft mod to ditch the rag joint and flex box joint of the gm shaft .


All times are GMT -4. The time now is 05:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com