1963 deluxe heater setup.
 

I got a 63 Deluxe heater setup. Bought it to put in my 66 but wasn't tripping that I got factory A/C I can't use this setup was thinking to save a little room mounted in the firewall area. All there and guy took it out to replace with Vintage Air and Heat did work bringing it home in the Box my car is lowered so went over a few bumps in the little thermal coil switch their fragile it broke and the knobs are missing other than that it's all there the all the cables work good slide up and down. Willing to trade for 66 heater core secondary lid the diverter for the AC has a big rectangle flap on the firewall with wite mesh inside?and then the actual lead goes over it I need that piece or willing to trade for long bed Custom Cab side trim for Fleetside long bed need passenger side long thick top molding and drivers side cab corner then lower molding also willing to trade for a 4 Barrel air cleaner really only need the bottom if you have the one that the bottom is like a pan and then the lid has the snorkel and the whole top is One Piece. Asking 100 plus shipping or willing to trade for any of those things I listed or parcel train or whatever just hit me up.

Re: 1963 deluxe heater setup.
 

OK - its a little hard to understand your post the way its written, but if you are saying you want a correct non-AC 64-66 deluxe heater box assembly in swap for this 60-63, then I have one I think.

Only way to get a factory AC heater box though is to buy factory AC unfortunately. Next to no one is going to sell you an AC specific heater box or the in-cab mounted fresh air door by itself and ruin the value of the rest of the AC which requires it to operate.

Let me know if you want to trade one for one for a non-AC deluxe heater box, or if you are in the market to buy complete in-cab + heater box factory AC.

Text or call 256-486-1988 vs PM

Re: 1963 deluxe heater setup.
 

No I have Factory AC in the truck I just need the diverter box the piece that goes right after the heater core and before the lid it's like a wedge type peace it's like meat on a pot metal I think and it's got the extra flap for the AC for the firewall

Re: 1963 deluxe heater setup.
 

News pictures of the controls all the cables move up and down

Re: 1963 deluxe heater setup.
 

ttt

Re: 1963 deluxe heater setup.
 

ttt,bump