Fender Flares
 

Recently bought a 04 chevy 2500 hd and the bed had some damage from a tire blowout which bent up the bed behind rear wheel and knocked off the flare in the process, I was able to pull out the dent as good as i could and want to remount the flare, where do I get the stick tape to do so?

Re: Fender Flares
 

Any parts place should the tape. It’s 3m double sided molding tape. It comes in all kinds of widths.

Re: Fender Flares
 

Thanks

Re: Fender Flares
 

OK so is there a trick to mounting them? My thought was fasten tape to flare 1st then fasten fastners to wheel well the pull tape off other side a little at a time and work your way around, Thoughts?

Re: Fender Flares
 

You mount one side of the double sided tape to the flare and leave the wax paper/plastic on the side that goes against the truck bed, with a little of the paper/plastic sticking out. You then mount the fender with the hardware at the arch and then pull the wax paper/plastic out so the adhesive contacts the fender and sticks.