The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Power steering hose question (https://67-72chevytrucks.com/vboard/showthread.php?t=822231)

ron350

05-29-2021 12:01 AM

Power steering hose question

I am going to replace the high pressure power steering hose in my 75 C10 truck and want to replace the low pressure hose while I am at it.

What is the advantage to using low pressure power steering hose over fuel injection rubber hose?

I have 3/8 inch fuel injection hose but will purchase some low pressure PS hose if needed.

kwmech

05-29-2021 12:50 AM

Re: Power steering hose question

No difference really, they are both oil resistant and return pressure is only about 30-35 #. I'd do it if that's what I had around. I'd recommend a filter though

Pontiac1976

05-29-2021 11:00 AM

Re: Power steering hose question

kwmech-

Quote:

No difference really, they are both oil resistant and return pressure is only about 30-35 #. I'd do it if that's what I had around. I'd recommend a filter though

good call on all.

ron350

05-29-2021 11:02 AM

Re: Power steering hose question

Thanks for the reply I did not know they made PS return kine filters.

All times are GMT -4. The time now is 07:35 PM.