Ramhorns
If I go to a V8 in my 81 in the future I was wondering if the Ramhorn manifolds will work on the squares without too much of an issue. I kinda like them better than the stock manifolds and don't really want to go with headers again (always hate the plug access with most all that I have had on a smallblocks). Thanks
|
Re: Ramhorns
They make a few different styles such as center dump and dog legged/ angled. Qlso corvettes had 2.5 inch center dumps. Can’t say i have seen them on a square body before.
|
Re: Ramhorns
Here's 2 threads about ram horns in square bodies.
http://67-72chevytrucks.com/vboard/s...light=Ramhorns http://67-72chevytrucks.com/vboard/s...light=Ramhorns |
Re: Ramhorns
Well, now I want some too.
Not to hijack the thread but are the Corvette ones available off the shelf? I'm installing a new engine and I would prefer to not use headers. |
Re: Ramhorns
|
Re: Ramhorns
No mention of the nice aftermarket ramshorns that everyone sells already chromed or polished. Those look pretty nice.
|
Re: Ramhorns
These 2 also have the 2.5 collector like the corvette ram horns.
Chrome https://www.jegs.com/i/JEGS/555/30100/10002/-1 Ceramic https://www.jegs.com/i/JEGS/555/30130/10002/-1 |
Re: Ramhorns
I had some on my 78 but they were close to the starter which caused some problems, just a thought for you.
|
All times are GMT -4. The time now is 11:05 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com