The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   OR WTB -- Blazer - NOS Black Lower Side Molding (https://67-72chevytrucks.com/vboard/showthread.php?t=828940)

PDXk5 12-20-2021 04:34 PM

WTB -- Blazer - NOS Black Lower Side Molding
 
1 Attachment(s)
I am looking for NOS molding for both the LH and RH side that mounts behind door to wheel opening. I believe these are the correct part numbers and are specific to Blazer/Jimmy. I believe these are uncommon but in searches of past Forum threads, see they are out there. Do you have one or both of these parts or any leads on where I can find these?

I have accumulated all of the other lower side molding parts in NOS and will get Mar-K if I can't source these but would really like to find them. Thanks for your help!

PDXk5 01-26-2022 02:54 AM

Re: WTB -- Blazer - NOS Black Lower Side Molding
 
ttt

1rippen6 had the 3997456 for me. I’m still looking for 3997455. Let me know if you have a one or a lead for one.

Thanks!

PDXk5 02-26-2022 03:08 AM

Re: WTB -- Blazer - NOS Black Lower Side Molding
 
ttt

Harold Holbrook 02-26-2022 01:50 PM

Re: WTB -- Blazer - NOS Black Lower Side Molding
 
That 3997455 is a hard one, Been looking for 3 years. Is the only one that I don't have.

atog 02-28-2022 07:46 PM

Re: WTB -- Blazer - NOS Black Lower Side Molding
 
2 Attachment(s)
I have the drivers side one that is Nos Woodgrain. I got it with a truckload of nos mlds several years ago. This was one of several that had damage and wrapper was torn all to xxxx. Has a small dent that chipped Woodgrain. If you wanted to spend the time removing Woodgrain and painting center $80 shipped. There is still some glue also from wrapper still on it

PDXk5 02-28-2022 11:35 PM

Re: WTB -- Blazer - NOS Black Lower Side Molding
 
Quote:

Originally Posted by atog (Post 9044522)
I have the drivers side one that is Nos Woodgrain. I got it with a truckload of nos mlds several years ago. This was one of several that had damage and wrapper was torn all to xxxx. Has a small dent that chipped Woodgrain. If you wanted to spend the time removing Woodgrain and painting center $80 shipped. There is still some glue also from wrapper still on it

Thank you atog !

I知 very interested. I haven稚 had much luck trying to find this piece in NOS. I have a Forum member checking on his stock. Give me a couple of days to get that run down and I値l get back with you.

atog 03-01-2022 06:07 AM

Re: WTB -- Blazer - NOS Black Lower Side Molding
 
I値l hold it for ya. No problem

PDXk5 03-07-2022 11:49 PM

Re: WTB -- Blazer - NOS Black Lower Side Molding
 
atog,
I値l take the trim piece. I値l send you a pm for contact info.

PDXk5 03-10-2022 09:43 PM

Re: WTB -- Blazer - NOS Black Lower Side Molding
 
Funds sent


All times are GMT -4. The time now is 05:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com