60x frame motor mounts after cross member swap
 

So i have the cross member off a 78 switched over to my 60 SWB. Im having a hell of a time finding a motor mount package for my 283 that will work on this set up. Any suggestios?

Re: 60x frame motor mounts after cross member swap
 

I used 67 - 72 mounts on my 62 with a 63 x member.

Re: 60x frame motor mounts after cross member swap
 

Were those the v8 or inline 6 mounts? They are different on the 67-72s

Re: 60x frame motor mounts after cross member swap
 

On your 60-62 frame, you can use 67-72 V8 mounts.
Or if you use 63-66 mounts, you'll have to use a 1/2 inch spacer between the top rail of the frame to the underside of the top portion of the motor mount stand/perch.
Here's mine with 63-66 stands/perches.

.
Here's another post from another thread:
http://67-72chevytrucks.com/vboard/s...69#post5427669

Re: 60x frame motor mounts after cross member swap
 

On my 61 I used the square body perches and cut them down and welded a plate on top.

Re: 60x frame motor mounts after cross member swap
 

I used the V8 mounts. I had the 63-66 mounts and had a block on the top of the frame rail but didn't like it. Capn fab suggested the 67 - 72 mounts and they worked out great.