The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 700R4 pilot bushing ? (https://67-72chevytrucks.com/vboard/showthread.php?t=835884)

Steveoreno

07-02-2022 01:09 PM

700R4 pilot bushing ?

I am swapping out the old 3-speed manual in my 66 C10 and will be installing a 1989 700R4. I have most everything needed however I have a question. The pilot bushing in the tail end of the crankshaft is too small in diameter and clearly needs to be replaced. Is there a proper pilot bushing for the 1966 327 that will accommodate the 700R4 shaft? Thanks....I searched the forum all morning not wanting to ask a question that had already been answered.

Steveoreno

07-02-2022 01:43 PM

Re: 700R4 pilot bushing ?

Okay...I wasn't thinking clearly....have it figured out now...no pilot shaft on a 700R4.....need coffee and shake off the "night before" LOL. Thanks all.

MikeN

07-04-2022 09:38 AM

Re: 700R4 pilot bushing ?

Correct :)

All times are GMT -4. The time now is 12:07 AM.