Turn/wiper/dimmer switch issue
I just put a new turn signal cam switch and ignition key switch in my 86 M1009 Blazer. The turn switch will not allow me to give a left signal because the rod hits the column housing when I attempt to do so. For some reason the wiper/dimmer switch seems bad or worn out somehow. I cannot seem to figure out exactly how this is removed and replaced.Can someone help me with this?
|
Re: Turn/wiper/dimmer switch issue
The dimmer switch is further down the column and is actuated by a rod making its way up to the turn switch. sounds like when you put it back together you missed the alignment of the 2 at the top. there is a piece that forms itself into the turn switch kinda shaped like a tear drop.
|
Re: Turn/wiper/dimmer switch issue
Thanks for the reply! I was able to figure it out and install everything perfectly.
|
All times are GMT -4. The time now is 10:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com