Cab parts and cuts
 

Cab cuts for sale.

All prices include shipping unless otherwise stated.

Price format is Fee-less payment method / PayPal Goods and Services method.


4) 69-72 Parking Brake Firewall holes and stamping - Excellent condition. $55/$75
5) Lower, outer cowl panel LH side - Solid. $55/$75
6) Lower, outer cowl panel RH side - Solid. $55/$75
7) Rear panel including driver side B pillar. One small ding in the middle section. Also some damage near/above the gas tank hole. $150 fee-less ($203 Paypal G&S) for the entire panel (no shipping). I could also cut the B pillar off separately. $75 plus shipping (fee-less) for B pillar.
8) Engine Firewall area (with green paint) - $20 plus shipping (fee-less) for any cut or all of the sheetmetal. Paypal G&S extra.
9) Rear passenger-side pillar. See post #8 for info and pics. $25 plus shipping (fee-less). Paypal G&S extra.
10) Courtesy light cab bumps - I think only some of the later year cabs had this stamped into the cab. So if you want to install courtesy lights on an older cab as GM did, you will need to add these to your cab. See post #9 for pics. $35/$48

Shipping outside CONUS extra.

Items that are sold or no longer available:
1) A/C Dash - no longer available.
2) A/C Firewall Box Section - Some heavy surface rust in one area as pictured. $75 shipped
3) Wiper Motor Mount cutout - Excellent condition. $65/$88

Re: Cab parts and cuts
 

#2 and #3

Re: Cab parts and cuts
 

#4, #5, #6

Re: Cab parts and cuts
 

#7

Re: Cab parts and cuts
 

#8

Re: Cab parts and cuts
 

I’m interested if you are willing to ship to Miami Fl 33176.

Re: Cab parts and cuts
 

PM sent

Re: Cab parts and cuts
 

Adding the passenger-side rear pillar. The cross-hatched area is dented. $30 for any portion plus shipping.

Re: Cab parts and cuts
 

Adding these courtesy light bumps to the thread. Great condition--surface rust only on the back side. Yellow ones are for sale. Pics of green ones for reference.

Re: Cab parts and cuts
 

Take #8. I am also looking for the passenger toeboard. The whole right side from mid firewall to floor.
Posted via Mobile Device

This is what I am looking for. I had it and it was accident ly thrown out!
Posted via Mobile Device

This is what I am looking for. I had it and it was accident ly thrown out!
Posted via Mobile Device

Re: Cab parts and cuts
 

#8 is the center section of firewall. I have that.

Do you also want piece #2 for the area you have circled?

I don't have the passenger toeboard any more...

Re: Cab parts and cuts
 

A few more pics just to make sure you know exactly what you will receive. The previous owner wasn't exactly surgical with his cuts. I will remove the insulation and attached parts before shipping.

Re: Cab parts and cuts
 

yes looks fine. send me the total

Re: Cab parts and cuts
 

pm sent with the total.

Re: Cab parts and cuts
 

I will take #2. How much to ship to 37421?

Re: Cab parts and cuts
 

Shipping is already included in the price. I will send you a PM with payment info. Thank you.

Re: Cab parts and cuts
 

Payment received--thank you!

Re: Cab parts and cuts
 

New prices

Re: Cab parts and cuts
 

Are you willing to cut portions out of #7?
I have a need for the lip/edge that the rear window's lower edge sit in - so the top section of #7 from side to side and about three to four inches down the back wall.

Re: Cab parts and cuts
 

Here's a markup to illustrate the description...

Re: Cab parts and cuts
 

PM sent

Re: Cab parts and cuts
 

#3 sold. Ttt