The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

valleycustom · 11-19-2005, 04:47 AM

Thanks. Here are some pictures showing how I get the keyway inside the DOM. There is a bushing that you insert into the tubing. This is a guide for the broach. You press the broach all the way through the tube, then you add shims behind the broach and press it again. You have to press the broach through 3 times before it's finished. It takes forever.

11-19-2005, 04:47 AM	#89
valleycustom Registered User Join Date: Mar 2005 Location: Modesto, Ca Posts: 225	Re: Custom Chassis with canti setup Thanks. Here are some pictures showing how I get the keyway inside the DOM. There is a bushing that you insert into the tubing. This is a guide for the broach. You press the broach all the way through the tube, then you add shims behind the broach and press it again. You have to press the broach through 3 times before it's finished. It takes forever. Attached Images __________________ Please become a site supporting vendor to advertise a business in your signature. you can do so here Last edited by valleycustom; 11-19-2005 at 04:49 AM.