The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 04-06-2006, 10:38 PM

It is getting the full CPP kit with the new lowered cross member that has the pinion angel adjusted for a 4" drop. Then their tubular trailing arms, 1.5" lowering blocks, 4" lower springs, adjustable full length panard bar, "C" notches and new shocks. Then it he has a currie set up 9" with new axels, drums and inners. Front is getting 2.5" drop spindles, lower springs, new steering parts, shocks and maybe rebuilt A arms and a power steering box. Then posibly a Por15 frame job.

Kevin
LFD Inc.

04-06-2006, 10:38 PM	#14
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project "Trazer" begins! It is getting the full CPP kit with the new lowered cross member that has the pinion angel adjusted for a 4" drop. Then their tubular trailing arms, 1.5" lowering blocks, 4" lower springs, adjustable full length panard bar, "C" notches and new shocks. Then it he has a currie set up 9" with new axels, drums and inners. Front is getting 2.5" drop spindles, lower springs, new steering parts, shocks and maybe rebuilt A arms and a power steering box. Then posibly a Por15 frame job. Kevin LFD Inc.