The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

'68 K-10 · 05-11-2006, 05:42 PM

hey thanks guys i talked to a knowledgeable 4x4 guy today i found out that the jackshaft should be about a foot and the angle should be 2-4 degrees. he suggested not to have the front as long as the back because the output bearing on the transfer wont hold up on the front

05-11-2006, 05:42 PM	#18
'68 K-10 Registered User Join Date: May 2002 Location: RAVENNA, MI. Posts: 70	Re: advice for divorced transfer install hey thanks guys i talked to a knowledgeable 4x4 guy today i found out that the jackshaft should be about a foot and the angle should be 2-4 degrees. he suggested not to have the front as long as the back because the output bearing on the transfer wont hold up on the front __________________ '68 K-10 IN PROGRESS OF A FIRST TIME RESTO. ANY ADVICE IS NEEDED. I'M IN NEED OF SOME PARTS TRUCKS NEAR MICH. THANKS