Quote:
Originally Posted by Rokcrln
I cut the leading edge of the window rail and in doing so I exposed the three layers of metal that make this area up. So what I had to do was cut the gap about 1/16" larger than I wanted and then stitch it back up. That is the easy part, the hard part is then grinding the welded edge to a perfect straite edge because you can not use body filler in this area. Once I had it with in a bout 1/16" I turned to a hand file for the fine tunning. This is alot of work but if you want it to look correct than you just have to do it.
Kevin
LFD Inc.
|
That's exactly what I did when I rounded the door corners on my '61. It is time consuming but well worth it! Nice work!