The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - -6 offset?

71tahoe · 07-31-2007, 11:37 AM

Actually 25.4 mm = 1 inch.

25.4/6 = .236" or 15/64. A little less than 1/4"

4.5 bs on 8.5 is about +12.5mm
5.25 bs on 10 is about +6.25mm

Whether they will work or not I don't know. I have 10s with 5 bs on front and back and have no problem on a stock height truck. I've had the rear on the bumps and still no problem.

07-31-2007, 11:37 AM	#5
71tahoe Registered User Join Date: May 2006 Location: Jonesboro, AR Posts: 916	Re: -6 offset? Actually 25.4 mm = 1 inch. 25.4/6 = .236" or 15/64. A little less than 1/4" 4.5 bs on 8.5 is about +12.5mm 5.25 bs on 10 is about +6.25mm Whether they will work or not I don't know. I have 10s with 5 bs on front and back and have no problem on a stock height truck. I've had the rear on the bumps and still no problem.