Quote:
Originally Posted by edflores
i have mine on 1/2 ups, 3/8's dumps with 5/8 line on 200 psi. i think it is slow. i have full control on the up but the dumps can be too fast, even with the reducers i have. my truck can get off the ground easily at 250 psi btw.
|
I used 5/8 lines on my Elky ,that was just rediculous.
Quote:
So it sounds like 1/2" for the fills and 3/8" for the dumps. Or should it be 1/2" for both and then use a needle valve to control the speed of the dumps?
|
IMO 1/2" valves are overkill unless you're interested in hopping.