Quote:
Originally Posted by Twisted78SS
tvblazer78,
What method are you going to use when smoothing your top? I am putting together the ideas for my 772wd project, and while the top is in excellent condition on the inside, the outside has a bit of the green fungus from sitting outside. I too was thinking about smoothing and painting it, just not sure of the proper method.
Thanks,
Twisted78SS
|
The texture is in the gel coat. First thing to do is pressure wash the top, and use a good detergent also. That should knock out a lot of the fungus. From there, take a DA with 80 grit, and start sanding. Finish it up with 180, then use a high build primer to fill in the sanding scratches. Block sand, and it's ready for paint. You may need to prime it a couple of times, depending on how bad the sanding scratches are. It's kind of a PITA, but the results are worth it, especially if you are changing the color of the top. Prepping the texture sucks too.