The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dirtboy488 · 04-10-2008, 09:11 AM

Today I took it down to the frame and found only a couple little things that needed to be cleaned upbefore I paint it.

I also ordered RE7's for all four corners as well as front plates and cups from Sucide Doors.

Ordered POR-15 to paint the frame/axle housing/control arms and P/S box

Lastly ordered Drop spindles, front end rebuild kit, adjustable track bar and shock relocators from CPP. The truck already has a 71 front cross member and suspension on it.

Hopefully by the time the POR gets here the frame will be cleaned up, blasted and ready to paint.

04-10-2008, 09:11 AM	#2
dirtboy488 Registered User Join Date: Aug 2005 Location: Reno, NV Posts: 86	Re: 1968 SWB 2WD Fleet build "lost time" Today I took it down to the frame and found only a couple little things that needed to be cleaned upbefore I paint it. I also ordered RE7's for all four corners as well as front plates and cups from Sucide Doors. Ordered POR-15 to paint the frame/axle housing/control arms and P/S box Lastly ordered Drop spindles, front end rebuild kit, adjustable track bar and shock relocators from CPP. The truck already has a 71 front cross member and suspension on it. Hopefully by the time the POR gets here the frame will be cleaned up, blasted and ready to paint. Attached Images __________________ 1969 C10 swb 2wd 1970 C10 swb 2wd SOLD Last edited by dirtboy488; 04-10-2008 at 09:14 AM.