[PBFAB.COM]

Finally have it 99% buttoned up.

A couple changes include:

-Upper bag mount/bridge favors the 73-87 kit.

-Rear four-link bracket is a weld on piece. Sorry for all the guys hoping that this would be 100% bolt-on, as I had originally intended. In order to get the link bars as close to the chassis as possible (for larger tires) I found it necessary to remove the trailing arm perch fron the axle tube and weld the bracket in place. The bracket is a two piece design, one bracket welds to the axle tube, and the other bolts over it and incorporates the four-link mount, bag mount, and shock mount. I made it modular in order to have some flexibility for fine tuning it with rvarying ride heights and or shock combos.