The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jeffs51chevy · 09-12-2008, 09:02 PM

Casey1 - look at the pictures on the 6-5-08 post. It shows a 2" hole cut in the top of the 1/4" plate. That hole recieves the stock s10 cab bushing. You then use the stock bolt holes in the cab to bolt it to the cab mounts. If it is still unclear, PM me and I will try to help you out.

09-12-2008, 09:02 PM	#46
jeffs51chevy Registered User Join Date: Dec 2007 Location: caldwell, idaho Posts: 132	Re: Yet Another s10 swap Casey1 - look at the pictures on the 6-5-08 post. It shows a 2" hole cut in the top of the 1/4" plate. That hole recieves the stock s10 cab bushing. You then use the stock bolt holes in the cab to bolt it to the cab mounts. If it is still unclear, PM me and I will try to help you out.