The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - "New" lower A-arm question.

gottwake · 11-14-2008, 11:50 PM

Why do you need to weld-in an 8" or 10 " ID pipe around the bag? Cant you just weld in a plate at the bottom of the a arm and cut a hole in the upper half? I mean you can add supports and such, but It just seems like it would have the same effect. If you welded the plate in all the way around and used 3/8".?
(Sorry to bogart the pic jlard)

11-14-2008, 11:50 PM	#1
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	"New" lower A-arm question. Why do you need to weld-in an 8" or 10 " ID pipe around the bag? Cant you just weld in a plate at the bottom of the a arm and cut a hole in the upper half? I mean you can add supports and such, but It just seems like it would have the same effect. If you welded the plate in all the way around and used 3/8".? (Sorry to bogart the pic jlard) Attached Images __________________ Blazer Project Last edited by gottwake; 11-14-2008 at 11:52 PM.