The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

phipp13 · 12-16-2008, 08:54 PM

the rod ends in the pic are NOT the ones i'm using, they're for mockup only. i have 3/4" chromemoly screw in rod ends. the Ladderbars are single adjustable though.As far as my front brackets i have 5 hole adjustment and i'll locate it in the center hole. i'll loose the stock cross brace/mount for a 2x3x.125 drop cross member with a driveshaft loop when it gets installed hopfully fwd of the stock trailimg arm pivot location . Saturday is the final DUMP RUN!!!!! for the DAMN YANKEE.

12-16-2008, 08:54 PM	#17
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Building the damn yankee the rod ends in the pic are NOT the ones i'm using, they're for mockup only. i have 3/4" chromemoly screw in rod ends. the Ladderbars are single adjustable though.As far as my front brackets i have 5 hole adjustment and i'll locate it in the center hole. i'll loose the stock cross brace/mount for a 2x3x.125 drop cross member with a driveshaft loop when it gets installed hopfully fwd of the stock trailimg arm pivot location . Saturday is the final DUMP RUN!!!!! for the DAMN YANKEE. Last edited by phipp13; 12-16-2008 at 09:09 PM. Reason: spelling