Well I finished the tank up today, but didn't make it to coating....
-
-
Here I filled it with water to check for leaks....found only one pin-hole and welded it up:
-
-
Welded up stock line:
-
-
-
Heated up the solder and removed the stock nipple, then drilled it out and welded in a 3/8 FP bung for return. Here I installed a scharder valve to pressurize the tank for leak testing.
-
-
-
Stock fuel sender is re-used, just cut and plugged:
-
-
-
It's a roller....
-
-
-