Quote:
Originally Posted by lolife99
Levi,... what is the application for those BB headers? They look nice!
|
what do you mean by application?
I went back and forth between ordering ceramic coated or thermal coated, and finally settled on the thermal coated. It was litterally a coin flip to make the final call. I think the ceramic coated look better, but was having a hard time justifying $440 for a pair. The thermal coated were about $130 cheaper.
If i remember correctly, these headers are listed as chevelle headers.
Also, after bolting them onto the block last night, they are quite different from one side to the other. the P side is long, i assume to clear the starter, and the D side is short, dumping out just before the oil filter.
based on the first fit, it looks like they will leave plenty of room to change spark plugs, and just about all plugs could use straight boots. only cyl #1 will "need" a 90 boot. however, the msd wires i got all have 90 boots. :/