The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shrunken66stroker · 03-23-2009, 04:10 PM

I'm using Evercoat Rage Extreme filler. It's not cheap but it's the best I've ever used. The first primer is going to be a ureathane epoxy primer because the truck is in bare metal but has filler on it. The second will be Evercoat Slick Sand. It's a high build primer surfacer that will flatten out nice after block sanding. You have to shoot it through a 1.8mm tip at least because of the high content of solids in it. It creates extra work on flat panels but sands extra straight.

03-23-2009, 04:10 PM	#86
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Shrunken66Stroker's build thread. I'm using Evercoat Rage Extreme filler. It's not cheap but it's the best I've ever used. The first primer is going to be a ureathane epoxy primer because the truck is in bare metal but has filler on it. The second will be Evercoat Slick Sand. It's a high build primer surfacer that will flatten out nice after block sanding. You have to shoot it through a 1.8mm tip at least because of the high content of solids in it. It creates extra work on flat panels but sands extra straight. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654 Last edited by shrunken66stroker; 03-24-2009 at 11:02 AM.