Re: Cross Member Drop?
I've built a very short stub assembly that amounts to not much more than two yokes and a carrier bearing. This assembly will mount to the forward axle tube to keep the d-shaft nice a tight. Then one d-shaft feeding from t-case to the stub, then another d-shaft from the stub to the rearmost axle. The stub is already built and I checked for clearnace already, it does clear even at this max drop. Obvioulsey ride height will be above this and even greater clearance. Theoretically the set-up I have in mind should cancel out d-line vibes and technically should work flawlessly with no d-line vib's at any ride height. We'll see if theoretical and reality match up.
|