Quote:
Originally Posted by SS68
"I moved the crossmember up 2 inches and forward 1 inch to center the wheel in the well a little better. I also moved the steering box up and forwad 1 inch as well"
i was looking at mine today, and folowing your directions if i were to move the crossmember the upper holes would be sitting off the frame. i would like more information on this please
|
i did the same on mine all im gonna do is gusset the plate the holes are in. i noticed on his pics that he cut the whole plate and upper spring cup off and welded a plate. he drilled the holes for the upper arm and im sure gusseted it. i studied this thread and his pics pretty hard before i done mine. and i have to say its a good bit of work but it pays off when the wheel is centered. im just a broke guy tryin to build my dream. but thats usually how it goes.