The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Questions on using a 78 front brake setup

1Quick_68Chevy · 04-28-2009, 10:55 AM

I have a 68 C-10 with full drums all the way around still, I've done a lot of looking around about using a front clip from a 73-87. So far the information that I have found is that I can use the control arms, outer tie rods, spindles, ball joints and it will all bolt up to my 68. I have a 78 donor front end. As I said before I have done tons of research for this but can not find a definite answer if this will work or not. Thanks for all your help in advance.

04-28-2009, 10:55 AM	#1
1Quick_68Chevy Registered User Join Date: Nov 2005 Location: Illinois Posts: 11	Questions on using a 78 front brake setup I have a 68 C-10 with full drums all the way around still, I've done a lot of looking around about using a front clip from a 73-87. So far the information that I have found is that I can use the control arms, outer tie rods, spindles, ball joints and it will all bolt up to my 68. I have a 78 donor front end. As I said before I have done tons of research for this but can not find a definite answer if this will work or not. Thanks for all your help in advance.