The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 05-01-2009, 06:30 PM

What I would do since you don't have windows and don't need wires running into your door is mount the latch in the A pillar and the strike on the door it self. This keeps everything real clean and then mount some trick door pulls right under the dash so they are out of site but easy to reach for sleek look. I have seen a few done this way and it would flow well with what you have started. I also like doing body solder (todays lead free lead) and it would be a great way to finish off welded seams if you friend is good with it and knows all the tricks.

Kevin
LFD Inc.

05-01-2009, 06:30 PM	#32
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Roadster Project What I would do since you don't have windows and don't need wires running into your door is mount the latch in the A pillar and the strike on the door it self. This keeps everything real clean and then mount some trick door pulls right under the dash so they are out of site but easy to reach for sleek look. I have seen a few done this way and it would flow well with what you have started. I also like doing body solder (todays lead free lead) and it would be a great way to finish off welded seams if you friend is good with it and knows all the tricks. Kevin LFD Inc.