The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Vortec swappers with dual tanks: how'd ya do it?

glock35ipsc · 07-15-2009, 01:47 PM

I think I have it figured out now. Since I already have in-tank pumps, I will jump switch out pumps to an AC Delco EP 241 or possible the Walbro 255. Although since Walbro sold the pump unit I have been reading a lot of bad news about their product since then. And they have a "low price in lieu of warranty" policy now.

I've ordered the above switch valve, and figured out what type of hose and clamps to use.

Not nearly as difficult as I thought. This should be a lot easier too since I will be using a returnless system on the engine.

Thanks for all the replies!

07-15-2009, 01:47 PM	#12
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Vortec swappers with dual tanks: how'd ya do it? I think I have it figured out now. Since I already have in-tank pumps, I will jump switch out pumps to an AC Delco EP 241 or possible the Walbro 255. Although since Walbro sold the pump unit I have been reading a lot of bad news about their product since then. And they have a "low price in lieu of warranty" policy now. I've ordered the above switch valve, and figured out what type of hose and clamps to use. Not nearly as difficult as I thought. This should be a lot easier too since I will be using a returnless system on the engine. Thanks for all the replies! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE