Wow, sorry they're so fuzzy. they looked fine on the camera
As you can see the exhaust is already close to the trailing arms and runs under the crossmember so we'll be running it through the crossmember. Going with all new exhaust as well.
Here's a few pictures of the rust areas needing attention still and some we've started to fix as well as the nice heated springs I'll be swapping out for bags. Let this be a warning to those considering heating springs...notice they are actually sitting on each other at the bottom.
Passenger rear floor
Patch for passenger rear floor
Driver's rear floor. I will have a box behind the seat so we cut out the rust and put this panel in running it all the way to the cab corner eliminating the factory "hole" there.
New carrier bearing (will probably be flipping before I put the bed back on)
Heated springs
