I do have a small update.....Sunday I mostly fixed up some of the previous work and did a bunch of head scratching. Fitting those tires is a *****. I trimmed my fender lips some more and decided to adjust the panhard. I moved it 5/16th's toward the passenger side. I think its a little too far and I may have to split the difference and bring it back some.
NOTE...measure the side to side at the same hite to compare...I think this threw me a little off, oh well. I have the adjustable panhard from CPP, by the way.
I did get the tank in its new home and partially plumbed. I like it
alot. It tucks up nicely and looks clean. I may re-route the compressor leads up over the way I had them before. I needed 45* fittings to do it and I didnt have them.....check the pics, I have everything else.
Dino warned me about this....in the pic of the valves and various fittings, the fittings are about $250 worth.
I got the two front sets of valves mounted but no pic of that. They are the middle two rows on the bench. I need to add my 3/8's fittings to the other set as I am stepping down a size in the rear bags. Keeping the 1/2'' to the front but adding a gauge for the front two corners.
Here are the pics.......I'll get some more soon.
