The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Conroe trucker · 09-27-2009, 07:59 PM

Had a small problem, Tuff Country sent me 6" front springs versus 4" as ordered.

So here it is with the new springs and on the ground versus dollys.

IT is 1" taller in the front and almost 2" taller in the back than my 70 with the same lift.

Once it breaks in and has 35 gallons of gas in the rear it should be perfect.

We Rapture coated the bottom of the cab, rear inner fenders, both sides of the front inner fenders, bed bottom, and the transmission cover.

09-27-2009, 07:59 PM	#47
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: 67 SWB 4x4 Had a small problem, Tuff Country sent me 6" front springs versus 4" as ordered. So here it is with the new springs and on the ground versus dollys. IT is 1" taller in the front and almost 2" taller in the back than my 70 with the same lift. Once it breaks in and has 35 gallons of gas in the rear it should be perfect. We Rapture coated the bottom of the cab, rear inner fenders, both sides of the front inner fenders, bed bottom, and the transmission cover. Attached Images __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06