Re: '50 5 window.....s10 swap
After measuring and measuring and measuring I got the mounts,cab and the front end all lined up. All that is left is to drill out the mounts and bolt the cab down. Will cut the frame horns down once I get the grille put together. Should have everything in and bolted down tomorrow. The rear section of the fenders is about 8 inches off the ground (no motor weight though). I think that the fender will end up being about 6 inches off the ground once the motor and tranny are in. Here are some photos of todays fun.
......and no the tape is not holding the fender together.....as my wife said. I used it as a guide for the wheel centerline
__________________
"Get Busy Living or Get Busy Dying"
1970 P10 Stepvan
Last edited by rhodog77; 03-15-2010 at 07:56 PM.
|