[hotrodsbyray]

Kim,
I have exactly the same alignment problem - don't exactly know how to properly correct it. I currently am experimenting with shims, dropping the front fenders / grille / radiator assembly, adding metal, or just brunt major movements with applied pressure devices (sledge hammer and short losses of temper!)
I wonder if raising the rear until it is level then bolting or attaching it to the cowl some way, then dropping the front might do it. Not much help but if something suddenly and magically works I'll let you know.
The other problem I see is that when the fender to cowl areas seem to get close to fitting, then the hood is all "wanker-jawed" as my granddaddy used to say.