The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

383Ram · 12-26-2009, 10:42 PM

OK, pics of the brake booster done

First is what i was dealing with, the picture is deceiving, because the valve cover had about a sheet of paper clearance between it and the booster.

Second is what i had after the work slotting the holes and switching to the smaller booster from a 1 ton truck. Yea, thats some snow on the cowl of the truck---god it almost kills me to have to put this outside for most of the winter, but a paying job in the garage is worth it.

12-26-2009, 10:42 PM	#47
383Ram Registered User Join Date: Apr 2009 Location: Truckville, The Capital of NY Posts: 217	Re: Crossbred, 454 into an '85 Ram OK, pics of the brake booster done First is what i was dealing with, the picture is deceiving, because the valve cover had about a sheet of paper clearance between it and the booster. Second is what i had after the work slotting the holes and switching to the smaller booster from a 1 ton truck. Yea, thats some snow on the cowl of the truck---god it almost kills me to have to put this outside for most of the winter, but a paying job in the garage is worth it. __________________ . 454/4 speed, '85 Dodge Ram hybrid build in progress 454, PP heads, Dual 500 CFM cabs, 'Vette manifolds. First time out---spinning for half track Slooowww build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=348050 Engine build thread at: http://www.chevelles.com/forums/showthread.php?t=326289 Last edited by 383Ram; 12-26-2009 at 10:45 PM.