The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tk-mpl · 01-02-2010, 04:25 PM

Thanx Don, I went to the local hose shop and got all stainless fittings and teflon braided hose. I was suprised on how much it cost. I think I still need some more too. It has cost me $280 CDN so far.

I was wondering what you used for a cooling fan and if you used the stock rad or an aftermarket. Depending on what year your setup is you will have PCM controled cooling fans. I have a 2007 so I have 2 fan speeds controled by the PCM and was wondering what will work..
Thanx
Trevor.

01-02-2010, 04:25 PM	#123
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	Re: project BIG RED (gen3 on air) Thanx Don, I went to the local hose shop and got all stainless fittings and teflon braided hose. I was suprised on how much it cost. I think I still need some more too. It has cost me $280 CDN so far. I was wondering what you used for a cooling fan and if you used the stock rad or an aftermarket. Depending on what year your setup is you will have PCM controled cooling fans. I have a 2007 so I have 2 fan speeds controled by the PCM and was wondering what will work.. Thanx Trevor. __________________ 1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust.