Re: 454 in 63 chevy?
I replied in your post in the 'Engine and Drivetrain' section. In that post you didn't mention that your '63 is a K10......that makes a bit of a difference. You can use the original style mounts as I previously mentioned. However if you were to change to a newer style motor mount (better design IMO), it will be a bit more involved than if it were a C10. On the K series the motor mount brackets are part of the engine crossmember. I have done some measuring in the past, and to install a newer style crossmember for the later style motor mounts will require some modification as the newer frames are taller than the older frames.
See my other post for the other issues.
|