The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

f.monroe · 01-14-2010, 11:16 PM

Just a bit of info for you . There were three different offsets made in that wheel . Not all will work on the front of a 3/4 ton 4x4 . They will rub if you get the ones with the most backspace . I think the other two will work . If you cant insert your finger between the wheel center and the rib in the outer hoop , they wont bolt onto the front .
Frank

01-14-2010, 11:16 PM	#12
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: WTB: 16.5 x10" steel wheels Just a bit of info for you . There were three different offsets made in that wheel . Not all will work on the front of a 3/4 ton 4x4 . They will rub if you get the ones with the most backspace . I think the other two will work . If you cant insert your finger between the wheel center and the rib in the outer hoop , they wont bolt onto the front . Frank __________________ Born and proudly residing in a Red State !