Re: 1969 Camaro "Yenko" Clone
Had my Friday off, now that i am a gov't employee, took the time and worked on the car, and picked up another job also. More on that in a bit. I finished the underneath of the car, patched up the remaining holes, welded up two patches, and sanded the underneath. Also finished the sub frame connectors. DSE wants you to weld them solid to the subframe, I refuse to do that. So i build them to bolt on a connector btn the frame and connector. Done, After I was done that, I went out to the shop at about 11 at nite and ground out the roof stuffing, yuck is all i can say. I was fully covered with masks and everything and covered with dust also. But finished that all up and let is settle overnite so I could clean the shop up the next morning. Now all I have to do is sand some on the inside and that is done. YAH! Oh and i picked up a 67 chevelle to do next winter also.
|