Re: Project: Recycle
Not much progress as I'm trying to source parts which ultimately effect planning direction....
I picked up the aluminum material that will be used for re-positioning the rear axles center-line back approx 1.5". My plan was to utilize a solid piece of alum but the limited size & amount I needed rendered a significant jump in price. I decided to go w/what was readily available & used some 'drop' material from my local steel yard. One local metal supplier wanted $70+ for what I needed (which I had a few choice words for), so my steel yard let me scour through their alum scrap stack & these 2pcs (.500" x 3" x 21" total) cost me < $7. I'll have to stack them but it really won't impact their function....
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
Last edited by SCOTI; 02-09-2010 at 12:44 AM.
|