[ed2552]

Wiring is the same. Just gotta remember which bulb goes in which hole. They use the same bulbs, and the same sockets, just different between the red and amber signals. Top (brake/running) goes to top, middle (signal/running) goes to middle, and bottom (reverse) goes to bottom. It's that simple. Be careful removing them, though, as they can be a b***h to get out. Apply a little silicone lubricant to the tabs on the new one to be able to remove it in the future. You remove the two screws on the side, then pull straight out. Also might want to replace the bulbs, and stash the old ones in a drawer for when one goes out. They're also the same as the driving light bulbs (3057).