View Single Post
Old 02-20-2010, 01:41 AM   #186
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,117
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Got some more garage time today. I found out I can turn the truck around inside the garage using my floor jack. Better light and more room to work this way. Cleaned up a dent on the firewall. Didn't spend too much time on it because I'm not doing anything special under the hood. I had a couple dings on the top side of the rockers, so I got those cleaned up a bit. I mixed up too much filler so pulled out one of the fenders and started getting it straightened out. It will definitely need more work, but I got started and made use of the filler rather than tossing it out. I also tried putting seam sealer in the rain gutter, but I'm not sure I did it right. I might have to clean it out and try again.

Before, with the half inch of filler:


After with maybe 1/8" filler:


Rockers:



fender


seam sealer
hgs_notes is offline   Reply With Quote