The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ljbear · 05-05-2003, 01:51 PM

Blue_71,

I'm not sure if I follow what you're saying. The front brakes on mine run off the front pot and are the smaller of the two lines, with the larger line in the back running the rear brakes. The smaller line enters the proprtioning valve on top and exits the proportioning valve on the bottom, while the larger line enters on top and exits to the rear of the valve. Here's a picture that may clear up what I have.

Larry

05-05-2003, 01:51 PM	#4
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Blue_71, I'm not sure if I follow what you're saying. The front brakes on mine run off the front pot and are the smaller of the two lines, with the larger line in the back running the rear brakes. The smaller line enters the proprtioning valve on top and exits the proportioning valve on the bottom, while the larger line enters on top and exits to the rear of the valve. Here's a picture that may clear up what I have. Larry Attached Images __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"