|
Re: '50 5 window.....s10 swap
99 to life,
The driveshaft is 58" center to center. I am running a 700R4, stock from my s10 donor truck. Your right, you will move the crossmember, need a different driveshaft and probably hump the floor. I did use the stock crossmember, cut and moved it back about 3 inches. I will have to hump the floor just a bit. I havent really gotten to that part yet. Dan is right, each build is different!!
Good luck.
Brian
__________________
"Get Busy Living or Get Busy Dying"
1970 P10 Stepvan
|