The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Over 25 Years Later, Finally My 71 C-10 Truck Build

hgs_notes · 04-12-2010, 11:40 PM

I was able to get most of the filler work done on the inner side. Just need to scuff/sand and clean it, then the inside is ready for epoxy primer. I'll probably do the driver side inner also and spray both doors at once. Then do the outer skins and get them in primer next. I used a zinc primer for the hinge areas. That was bare metal from the factory.

04-12-2010, 11:40 PM	#256
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,115	Re: Over 25 Years Later, Finally My 71 C-10 Truck Build I was able to get most of the filler work done on the inner side. Just need to scuff/sand and clean it, then the inside is ready for epoxy primer. I'll probably do the driver side inner also and spray both doors at once. Then do the outer skins and get them in primer next. I used a zinc primer for the hinge areas. That was bare metal from the factory. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff