Re: Project Burro Viejo
I'm working my way back on the frame, sanding and painting. I will have a lot to do before the final paint job. The whole rear (leaf spring) suspension is out! I picked up a good set of trailing arms and a 12 bolt rear for a great deal at a big auto show in Wisconsin. This time, I painted far enough back that I can bolt in the Porterbuilt crossmember. Tomorrow, I will be cutting out frame notches and installing the PB mild notches. I will be doing some fabrication work for the shocks and panhard bar. I am going to relocate both the shocks and panhard bar, I want the shocks as close to the wheel as possible and the panhard bar as low as possible. That will also require a new crossmember for the panhard bar.
|