Re: Is something wrong here? thought I'd be lower...
Quote:
Originally Posted by blime81
Ok, a couple things:
1: The bolts for your upper ball joints are in backwards. The nut should be up with the bolt head down.
2: You do have drop spindles, I can plainly see the back of the spindle in one of your pics. It is higher (more towards the middle) than stock ones so it's a drop spindle for sure but may not actually be 3" probably a 2.5" or 2".
You have to flip the bolts for sure.
|
I will get them changed tomorrow
I'm almost 100% sure they are 3" spindles as they rubbed my 15" rally's pretty good, I dont think a 2.5" spindle will cause any rubbing
__________________
Adam
That's why they call it a shortcut Kyle, if it was easy it would just be the way.
86 c-10 SWB
85 CCSB
90 GMC K30 Crew SRW
1985 C30 Dually
|