Thread
:
Junkyard Jimmy Super Low Buck Build Thread
View Single Post
09-06-2010, 06:20 PM
#
269
hgs_notes
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,116
Re: Junkyard Jimmy Super Low Buck Build Thread
I forgot something from my last post. I have a hitch that I used to have on my C-10, but will no longer use. At the time I bought it, you could not find the correct one for these trucks, so I bought a 73 and up hitch and modified it. If you take the side pieces and swap them so the top plate is bent inwards rather than outwards, it almost fits, but there is a gap. So I had 1/2" plate cut to size to use as a spacer and had holes drilled to match the hitch bolts. It worked perfectly for the truck. Not so much for the Jimmy. I'll have to make some holes in the Jimmy frame for it to bolt in, but it will really strengthen the rear end of the frame. It's about 1/4" plate. It will act as an added rear crossmember, and I might be able to use it as a base to bolt a home made gas tank skid plate onto. You can see in the pics it lines up on the frame perfectly and will cover most of the sides of a gas tank as is. I already checked the bumper fit and should be ok there as well.
Got the parking brake cables ordered from LMC, $50 for the pair.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong
HG's Dream Car Build - Shelby Cobra Kit
Build your own adjustable track bar
71
Long Fleet C/10
72
Jimmy 4x4 (Junkyard Jimmy)
HG's Plow Truck '78
K35 Dually
Bigass Farm Truck
HG's thread of miscellaneous stuff
hgs_notes
View Public Profile
Find More Posts by hgs_notes