The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project 67 C-10

67-C10 · 09-06-2010, 10:31 PM

Race back in may i broke the wheel studs off in the middle of the corner that was fun, not. Some pics from the beach which rained for half the time there. Did catch 15 bluefish with my buddy the last day and got 138 pounds. Had to move the first few days cause the storm pushed the waves over the crest. Pics of the fenders and a cup car tire under the front end, thing is wide. The drivers side fenders is way out of wack with the top mount u can tell was in the jig wrong and the topholes of the innner fenderwheel are off about an inch. pass side is marginal.

09-06-2010, 10:31 PM	#1
67-C10 Registered User Join Date: Jul 2008 Location: Taunton, MA Posts: 224	Re: Project 67 C-10 Race back in may i broke the wheel studs off in the middle of the corner that was fun, not. Some pics from the beach which rained for half the time there. Did catch 15 bluefish with my buddy the last day and got 138 pounds. Had to move the first few days cause the storm pushed the waves over the crest. Pics of the fenders and a cup car tire under the front end, thing is wide. The drivers side fenders is way out of wack with the top mount u can tell was in the jig wrong and the topholes of the innner fenderwheel are off about an inch. pass side is marginal. Attached Images __________________ 67 C10 2wd Stepside (to be fleetside), Factory AC truck, Big Back Window, just got a 6.0/6l90e to jam in it now..... Needed: paint and lots of it. and i'm sure lots more misc. parts. Project 67 short step Build Thread 01 Sierra Crew 6.0 2015 Ford F150 Work gave me truck i really wouldn't buy a ford. Last edited by 67-C10; 09-06-2010 at 10:35 PM.